How to Screen Mirror iPhone or iPad to a Windows PC

8

min read

Learn how to mirror your iPhone or iPad to a Windows PC using AirPlay receivers, companion apps, a browser, or a compatible HDMI capture setup.

You can mirror an iPhone or iPad to a Windows PC, but the computer needs a way to receive the screen.

  • For wireless mirroring, that usually means installing receiver software on Windows, then connecting through either Apple’s Screen Mirroring menu or a companion app.

  • A browser-based receiver is another option if you cannot install a desktop application.

  • If a local wireless connection is unavailable, compatible video-output hardware and an HDMI capture card can provide a wired route.

Windows Wireless Display is not a native AirPlay receiver. Installing it will not, by itself, make your PC appear in an iPhone’s Screen Mirroring list. Connecting an ordinary USB cable is not enough either.

Choose the Right Mirroring Method for Your Setup

If you are unsure which connection type your devices need, use our screen mirroring compatibility checker as a starting point. Its results are based on device categories, not a live test of your exact hardware. Then narrow the choice by what you can install and how the devices can connect:

  • You can install Windows software and want to use Apple’s built-in controls: use a Windows receiver that supports AirPlay mirroring. You generally do not need an extra sending app on the iPhone or iPad for this mode.

  • You want to connect through a mobile app: use software with a compatible companion-app workflow. Depending on the product and mode, you may select the PC inside the app, scan a QR code, or follow a pairing prompt.

  • You cannot install a Windows receiver: use a tool that explicitly supports receiving the screen in a PC browser. This can still require an app on the phone or tablet.

  • You cannot use a local wireless connection: check whether your device supports video output through a suitable adapter, then use a compatible HDMI capture setup.

Audio, recording, and remote control are separate considerations. A method that displays your screen does not necessarily record it, capture every app’s sound, or let you operate the iPhone with a mouse. If any of those capabilities is essential, check the chosen mode before setting it up.

The iPhone and iPad workflows below are largely shared. The important differences are the connection mode, device controls, and—in a wired setup—the exact model’s video-output support.

Method 1 — Mirror Wirelessly with Windows Receiver Software

Third-party tools such as Reflector and 1001TVs offer ways to display an iPhone or iPad on a Windows computer. They are examples, not a ranking, and their connection options are not interchangeable. Some receive AirPlay directly; others provide app-based discovery or screen broadcasting. A single product may offer more than one mode.

Download the Windows software from its official source, check its current system requirements, and open the receiver. For the local wireless workflows described here, put the iPhone or iPad and PC on the same network, with communication allowed between them. Then follow the connection entry point supported by your selected mode.

Connect from Control Center Using AirPlay

Use this route when the Windows application explicitly supports receiving AirPlay screen mirroring. Reflector is one example: its iPhone-to-Windows tutorial shows how to connect through Control Center. The receiver runs on the PC; the sending controls are already part of iOS and iPadOS.

  1. Open the receiver on Windows. Check the receiver name so you can recognize it on the mobile device.

  2. Open Control Center on your iPhone or iPad. On recent devices, swipe down from the upper-right corner. Older iPhones may use a swipe up from the bottom instead.

  3. Tap Screen Mirroring, shown by two overlapping rectangles.

  4. Select the Windows receiver. Its name may match the computer name or a name configured in the receiver application.

  5. Complete any connection approval or code prompt shown on either device.


Once the PC displays your screen, move between two ordinary pages on the iPhone or iPad. The computer should follow those changes. If sound matters, also play a short piece of non-protected content and check the PC’s audio output.

To end the connection, return to Control Center → Screen Mirroring → Stop Mirroring.

If the receiver is missing from the list, first confirm that the Windows application is running and allowed to communicate through the firewall. Do not switch to installing Miracast components: this connection depends on an AirPlay-compatible receiver, not Windows Wireless Display.

Connect from a Companion App

Use this route when the software asks you to discover, pair with, or start sharing to the PC through an iPhone or iPad app. For example, the 1001TVs iPhone-to-computer tutorial shows how to select the Windows receiver or scan its QR code, then start screen sharing from the mobile app. The steps below illustrate that workflow; other tools may use different connection controls.

  1. Install and open 1001TVs on both devices. Keep the Windows receiver running and connect the iPhone or iPad and PC to the same local network.

  2. Allow the permissions needed for that connection, such as local-network access. A QR-scanning option may also request camera access; manual device selection does not inherently need the camera.

  3. Open Screen Mirroring in the mobile app and select your PC, or use the app’s scanner to scan the QR code displayed by the Windows receiver.

  4. Approve the connection on Windows if prompted.

  5. Start screen sharing from the mobile app. Complete any iOS or iPadOS screen-broadcast confirmation that appears before expecting a live picture.

Pairing and broadcasting are not the same event. A connection confirmation can appear before screen transmission actually starts. The useful success check is a live image on the PC that changes when you navigate on the phone or tablet.

This example starts inside the mobile app; the PC does not need to appear in Apple’s native Screen Mirroring list. Other tools may instead direct you to Control Center. If yours does, follow the AirPlay steps above rather than looking for a separate in-app broadcast control.

Use the stop-sharing control for the active mode when finished. Exact button names, audio options, and recording features depend on the application; you do not need to enable every permission or feature just to display the screen.

Method 2 — Use a Browser-Based Receiver on the PC

A browser receiver can help when you cannot install desktop software on Windows but can install a compatible app on the iPhone or iPad. It does not mean the phone can send its screen to any open browser without preparation. The selected tool must explicitly support browser reception.

For a concrete example, 1001TVs describes a local-address option and a webpage-and-QR option in its browser-mirroring instructions. This is one implementation, not a feature shared by every product listed above.

The general connection sequence is:

  1. Open the mobile app’s browser-mirroring feature. Check which browsers and network conditions it supports.

  2. Open the address supplied by the app on the Windows PC. For a local-address connection, enter the displayed IP address into the browser’s address bar. For a QR-based connection, open the supplied webpage and scan its code from the phone as instructed.

  3. Start screen sharing from the mobile app and complete any iOS or iPadOS screen-broadcast confirmation that appears.

  4. Check that the browser displays a changing, live image.

In the documented example, Chrome is recommended. The local-address option requires the devices to communicate on the same local network, so it is not a workaround for network isolation or a general-purpose remote-access method.

Check audio support before choosing a mode. Some browser modes transmit video without sound; others support audio but require you to allow playback on the receiving webpage. Even an audio-capable mode cannot guarantee that every app will share its sound. Follow the current app’s prompts rather than assuming a particular mode name or button applies to every tool.

When finished, stop the broadcast on the mobile device. Browser reception removes the need for a Windows receiver installation, not the need for a supported sending app, relevant permissions, or an allowed network connection.

Method 3 — Use HDMI Capture with a Compatible Wired Setup

A wired capture setup sends video out of the iPhone or iPad and into a capture device connected to Windows. It requires more hardware than wireless mirroring, but it does not depend on the local wireless discovery used by the previous methods.

Check video-output support before buying anything. You need the exact iPhone or iPad model to support the chosen output, an appropriate adapter, and a capture card compatible with your Windows system and USB connection. Lightning and USB-C devices use different accessories, and a USB-C connector alone does not establish video-output support. Apple’s guide to USB-C connections on iPhone distinguishes supported display connections from ordinary charging and data transfer.

For a compatible HDMI setup, the signal path is:

iPhone/iPad → compatible video adapter → HDMI cable → capture card’s HDMI IN → capture card’s USB connection → Windows PC

The capture card receives the video. Most laptop HDMI ports are outputs, so plugging a phone’s HDMI adapter into a laptop’s ordinary HDMI port will not turn the laptop into a monitor. Use the capture card’s HDMI input, not an HDMI output or passthrough port.

After confirming compatibility:

  1. Connect the video adapter to the iPhone or iPad.

  2. Connect its HDMI output to the capture card’s HDMI input.

  3. Connect the capture card to the required USB port on the PC. Follow that card’s driver or software requirements.

  4. Open supported capture software and select the capture device. Use its preview to check the incoming picture. If you use OBS, confirm that the specific card supports it rather than assuming every capture device works identically.

  5. Check the mobile device’s Home Screen or another ordinary page first. Then check the audio input and monitoring settings if you need to hear sound on the PC.

Recording is a separate action in the capture software. Seeing a preview does not mean a file is being saved, and a picture without audible monitoring does not necessarily mean no audio is arriving.

Protected video may not be capturable. Apple’s Digital AV adapter guidance explains that some content requires HDCP, while the Elgato 4K X specifications require unencrypted HDMI input. Also, some apps provide a separate video output rather than an exact copy of the built-in screen. This method does not guarantee zero delay or provide control of the mobile device.

If Your First Connection Still Fails

Check the connection entry point first. An AirPlay receiver belongs in Control Center’s Screen Mirroring list. An app-based mode may use its own device list, and a browser receiver follows the tool’s address or pairing process. Looking in the wrong list can make a working receiver appear unavailable.

Then check whether the network permits device-to-device communication. Sharing a Wi-Fi name is not always enough: guest isolation, separate network segments, VPN settings, or organizational policies can interfere. A QR code identifies or pairs a receiver; it does not automatically bypass those restrictions. Try an approved local network or ask the administrator to allow the necessary communication rather than disabling the firewall entirely.

Separate a completed pairing from an active broadcast. If the PC accepted the connection but has no picture, check whether the mobile device actually started sharing and whether the required permission or system restriction is blocking it.

If ordinary pages mirror correctly but one app is black or silent, the connection itself may already be working. Check that app’s capture or playback limitations before reinstalling the receiver. For an HDMI setup with no preview at all, return to the exact device’s output support and the capture card’s input requirements. If these checks do not resolve the connection, our screen mirroring troubleshooting guide provides broader device and network checks.

Once your check is complete, stop mirroring or broadcasting on the iPhone or iPad rather than leaving the session running.

Still Need a Hand?

Explore more reviews, step-by-step guides, and troubleshooting tips—or contact us if you could not find the answer you needed.

Simple guides, honest app reviews, and practical fixes for screen mirroring.

© 2026 MirrorScreen. All rights reserved.